Bissell ProHeat 2X Manual
Your cleaner deep ProHeat BISSELL 2 X is a cleaning system for the home that uses the power of the heat, brush and the formula for cleaning dirt deep for maximum cleaning. It not only comes with many unique features, is designed with you, the customer, in mind. Models BISSELL ProHeat 2 X feature a patented built-in heater which heats the hot tap water you put in up to 25 degrees hotter for safely optimize the effectiveness of the cleaning. The heater will never allow the temperature to exceed 190 degrees. The switch of the heater in the front part of the machine controls the heater so you have the option to turn off the heat if you are cleaning the delicate wool or oriental rugs.
DirtLifter PowerBrush two rollers are designed to improve the cleaning performance. The pattern of bristles raised safely deep dirt while gently toilet the carpet fibers. Floating suspension automatically adjusts to all the heights of the carpet. Once the product is in a vertical position, the brushes stop automatically turn. Custom clearance function automatically mixes the hot water from the tap with the BISSELL formula. Simply choose one of the 4 settings (heavy traffic, normal cleaning, light cleaning or rinsing with water) and the ProHeat 2 X set the correct amount of cleaning solution to mix it with hot water to adapt to your need of cleaning. You have a separate water tank solution tank also does not allow any waste of the formula. Since water and the solution are stored separately, do not mix until you are ready to clean. When you finish your cleaning job, the formula can be stored ready for use on your machine for the next time!
Table content Bissell ProHeat 2X Manual
DirtLifter PowerBrush two rollers are designed to improve the cleaning performance. The pattern of bristles raised safely deep dirt while gently toilet the carpet fibers. Floating suspension automatically adjusts to all the heights of the carpet. Once the product is in a vertical position, the brushes stop automatically turn. Custom clearance function automatically mixes the hot water from the tap with the BISSELL formula. Simply choose one of the 4 settings (heavy traffic, normal cleaning, light cleaning or rinsing with water) and the ProHeat 2 X set the correct amount of cleaning solution to mix it with hot water to adapt to your need of cleaning. You have a separate water tank solution tank also does not allow any waste of the formula. Since water and the solution are stored separately, do not mix until you are ready to clean. When you finish your cleaning job, the formula can be stored ready for use on your machine for the next time!
Table content Bissell ProHeat 2X Manual
- Safety instructions
- Product view
- Assembly
- Special features
- Operation
- Maintenance and care
- Troubleshooting
- Consumer service
- Replacement parts
- Warranty
0 Response to "Bissell ProHeat 2X Manual"
Post a Comment